SUCCESS NORTH WEST FUNDED BY

Available Courses

See below a list of available courses available for Construction / Trades.

The CSR Health and Safety Training scheme is one-day safety awareness training and follow up skills assessment. The programme is aimed at all construction personnel including new entrants, to ensure that they have a basic knowledge of health and safety to comply with relevant legislation and make them aware of the inherent dangers on construction sites.

Duration: 1 Day
Level(s): industry specific

Contact:

padraigin@successnw.com

This course will teach you about the fire risks in work premises and what safety measures should be in place to control them. It explains everyone’s legal responsibilities, the common causes of fires, how to prevent them, what fire safety arrangements are necessary, and the importance of following emergency procedures. It is suitable for anyone at any level, no matter what industry you work in, from employees to managers and full-time to part-time staff.

Qualsafe Awards
Duration: 1 day
Level(s): Level 2

Contact:

padraigin@successnw.com

This course is suitable for all employees who work in environments with hazardous substance, such as healthcare manufacturing cleaning transport and office environment. COSHH stands for 'Control of Substances Hazardous to Health'. COSHH is a set of regulations put in place to protect workers from ill health when working with specific substances and materials. COSHH was introduced to control the exposure of a business’ employees to hazardous substances.

Qualsafe Awards
Duration: 4 Hours
Level(s): Level 2

Contact:

padraigin@successnw.com

•    how to follow safe working practices at all times
•    PUWER, LOLER and other relevant Health & Safety legislation
•    Working knowledge of the manufacturer handbook
•    Locating and identifying the major components of the machine and their functions
•    Identifying and maintaining PPE appropriate for excavator use
•    How to safely conduct pre operational checks of the machine
•    Starting, stopping and moving the machine safely
•    How to safely mount and dismount the machine
•    Configuring the machine for travel and manoeuvring it safely laden and unladen across varying terrain in open and confined spaces and inclines
•    How to conduct safety checks of work area
•    Correctly configure in readiness to carry out lifting and load handling tasks
•    Lift and transfer loads accurately and safely at different locations
•    Load and unload external transport safely
•    Fit, adjust and remove attachments
•    How to carry out all end of shift and shut down procedures.

NPORS (CSCS)
Duration: 5 days

Contact:

padraigin@successnw.com

•    how to follow safe working practices at all times
•    PUWER, LOLER and other relevant Health & Safety legislation
•    Working knowledge of the manufacturer handbook
•    Locating and identifying the major components of the machine and their functions
•    Identifying and maintaining PPE appropriate for excavator use
•    How to safely conduct pre operational checks of the machine
•    Starting, stopping and moving the machine safely
•    How to safely mount and dismount the machine
•    Configuring the machine for travel and manoeuvring it safely laden and unladen across varying terrain in open and confined spaces and inclines
•    How to conduct safety checks of work area
•    Correctly configure in readiness to carry out lifting and load handling tasks
•    Lift and transfer loads accurately and safely at different locations
•    Load and unload external transport safely
•    Fit, adjust and remove attachments
•    How to carry out all end of shift and shut down procedures.

NPORS
Duration: 3 days

Contact:

padraigin@successnw.com

•    how to follow safe working practices at all times
•    PUWER, LOLER and other relevant Health & Safety legislation
•    Working knowledge of the manufacturer handbook
•    Locating and identifying the major components of the machine and their functions
•    Identifying and maintaining PPE appropriate for excavator use
•    How to safely conduct pre operational checks of the machine
•    Starting, stopping and moving the machine safely
•    How to safely mount and dismount the machine
•    Configuring the machine for travel and manoeuvring it safely laden and unladen across varying terrain in open and confined spaces and inclines
•    How to conduct safety checks of work area
•    Correctly configure in readiness to carry out lifting and load handling tasks
•    Lift and transfer loads accurately and safely at different locations
•    Load and unload external transport safely
•    Fit, adjust and remove attachments
•    How to carry out all end of shift and shut down procedures.

NPORS (CSCS)
Duration: 3 days

Contact:

padraigin@successnw.com

One of the most widely accepted Nebosh qualifications designed to benefit all learners in all stages of their Health & Safety. It supports managers supervisors and staff to make improvements and gain sustainable health & safety knowledge .

Nebosh General Certificate
Duration: 10 Classroom Days
Level(s): Level 3

Contact:

padraigin@successnw.com

This is a 5-day course with their DVA driving test on the 5th day. The 4 days training will include the following but this may be tailored slightly to meet the needs of the candidates. Our fleet consists of modern vehicles of the highest specification. On road driving to include various types of junctions including roundabouts, junctions, traffic lights, stop and give way signs

DVA
Duration: 5 days

Contact:

padraigin@successnw.com

Responsibilities and accountabilities - requirements of managers with regard to health and safety, Legal requirements -  health and safety law, Risk assessment - key steps and control strategies, Health and safety management systems - benefits and key elements, Accident causation and investigation – root cause and human factors, Hazards in the workplace – identification and control, Monitoring – using active and reactive measures to monitor health and safety performance.

IOSH
Duration: 1 day (IOSH Working Safely), 3 days (IOSH Managing Safely)
Level(s): Level 3

Contact:

padraigin@successnw.com

fire risks in work premises and what safety measures should be in place to control them; legal responsibilities; the common causes of fires, how to prevent them; what fire safety arrangements are necessary; the importance of following emergency procedures; fire risk assessment. Use of fire fighting equipment including extinguishers is an optional extra.

Industry Recognised GHS certificated or Qualsafe accredited.
Duration: Level 1 - 3 hours, Level 2 – 1 day
Level(s): Levels 1 & 2

Contact:

padraigin@successnw.com

The legal requirements of the Provision and Use of Work Equipment Regulations 1998 (PUWER), practical advice on what you can do to eliminate or reduce the risks from work equipment, new machinery supply, the need for care if modifying existing machinery, and safety during maintenance of work equipment.

Mapped to Industry Standards/GHS Certificated.
Duration: 3 hours
Level(s): Level 2

Contact:

padraigin@successnw.com

What an abrasive wheel is, key legislation and guidance, the common hazards, selection and handling of wheels, safe use of wheels, the use of personal protective equipment and respiratory protective equipment and controlling the risk posed by dust.

Industry recognised/GHS Certificated
Duration: 3 hours
Level(s): Level 2

Contact:

padraigin@successnw.com

An understanding of hazardous substances, as outlined within the Control of Substances Hazardous to Health Regulations 2002 (COSHH); the knowledge needed to identify hazardous substances in the workplace and understand the legal requirements of COSHH; how to undertake a COSHH risk assessment and know the different control measures that can be implemented to manage risks that hazardous substances can cause.

Industry recognised/GHS Certificated/ Qualsafe accredited.
Duration: 3 hours
Level(s): Level 2

Contact:

padraigin@successnw.com

How to work safely in confined spaces and poorly ventilated areas, gain a better understanding of your legal responsibilities when working in confined spaces, gain a better understanding of the safest ways to enter and exit confined spaces.

Industry recognised/GHS Certificated
Duration: 3 hours
Level(s): Level 2

Contact:

padraigin@successnw.com

Health and safety legal requirements, Roles and responsibilities of employers, demonstrating best practice for health and safety compliance, Communicating health and safety information, Definition of key health and safety terms, Main causes of injuries and ill health at work, Safety management systems.

GHS certificated or Qualsafe accredited.
Duration: Level 1 – 3 hours, Level 2 – 1 day, Level 3 – 3 days
Level(s): Levels 1, 2, & 3

Contact:

padraigin@successnw.com